Hobart LXiGC ML-130018 Manuel d'utilisateur télécharger pdf (Page 4)

– 4 –

Installation, Operation and Care of

LXi SERIES DISHWASHERS

SAVE THESE INSTRUCTIONS

GENERAL

The LXi Series dishwashers are fully automatic, front-loading dishwashing machines that are capable

of 30 racks per hour.

All LXi Series dishwashers shut down automatically 4 hours after last use to conserve energy.

All LXiH and LXiGH dishwashers include

Sense-A-Temp

to insure proper hot water temperature

during rinse.

Standard equipment includes two 20" x 20" racks, electronic controls, drain pump, fill hose and drain

hose.

MODEL DESCRIPTION

LXiC Fresh water rinse; low-temperature, chemical-sanitizing models for use

with 6% sodium hypochlorite solution (bleach) as the sanitizing agent.

Note: If 8.40% bleach is to be used, contact Hobart Service to change the

sanitizer pump settings. (Charges will apply)

LXiH Fresh water rinse with a built-in 70°F rise booster heater. This allows an

incoming water temperature of 110°F.

1 2 3 4 5 6 7 8 9 ... 23 24

Pas de commentaire

Hobart LXiGC ML-130018 Manuel d'utilisateur Page 4